loading

Techemer -  Water-Lubricated Bearings & Shaft Seals Manufacturer Since 2008 

Techemer PREM – High Performance Elastomeric Polymer Bearing Material
Techemer PREM is an upgraded elastomeric polymer bearing material developed based on the proven TSTN formulation. Designed specifically for demanding applications, PREM significantly improved compressive strength and bearing load capacity, making it ideal for use in horizontal or inclined shafts, and delivering enhanced performance for vertical pump installations.
Key Advantages :
With an integral dynamic bearing surface pressure rating of no less than 12 MPa, and compressive hardness exceeding 38 MPa, Techemer PREM delivers reliable performance under heavy loads.
PREM is engineered to provide greater resistance to compression compared to TSTN, improving operational stability and extending service life in harsh working environments.
Especially suitable for horizontal and inclined shafts, where PREM excels by promoting hydrodynamic lubrication even at low speeds, thanks to improvements in groove design. This leads to:
● Reduced startup torque
● Lower dynamic and static friction
The bearing length-to-diameter (L/D) ratio can be reduced from the traditional 2–4 to as low as 1–2, allowing for more compact bearing assemblies without compromising performance.
Compared to TSTN, PREM demonstrates superior results on vertical shaft applications, where consistent load distribution and reduced wear are critical.

Material Grade

MaterialPREM
PropertiesUnitTest MethodTypical Value
Physical Property
Densityg/cm³GB/T 1033.1 /ISO 1183.11.17
Mechanical Properties
Tensile StrengthMPaGB/T 1040.2 /ISO 527.233.7
Elongation at Break%GB/T 1040.2/ISO 527.2270
Shore Type D Hardness°GB/T 2411/ISO 86862~70
Water Absorption Mass (Saturated)%GB/T 1690/ISO 18171.2
Water Absorption Volume (1080h)%GB/ T1690/ISO 18171.4
Charpy Impact Strength (Notched)kJ/㎡GB/T 1043.1/ISO 179.1100
Compressive StrengthMPaGB/T 1041/ISO 60438.4
Modulus of CompressionMPaGB/T 1041/ISO 604430
Maximum Load Capacity (Low-speed oscilating at 25% strain )MPa 27
Maximum Load Capacity (continuous operation at 25% strain )MPa 12
Maximum Operation Temperature (in water)°C 70
Maximum Operation Temperature (Dry)°C 110
Friction Properties
Relative Volume Wear (by Rotating Cylinder Drum)mm³GB/T 25262/ISO 2379484
Applications
  •  Horizontal and inclined water-lubricated shafts
  •  Vertical pumps and turbines
  •  Marine and hydropower equipment
  •  Custom industrial machinery requiring high load and friction optimization
LEAVE A MESSAGE

Please feel free to contact us at any time

Take a look around our website. If you have a query or you need advice, We'll take time to help you. If you have any questions about your order, please feel free to contact us.
Ms. Jenny Li
+14163889018
jennyli@techemer.com.cn
Product Lives
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service