Techemer - Water-Lubricated Bearings & Shaft Seals Manufacturer Since 2008
Techemer TITN is a wear-resistant elastomer alloy developed for water-lubricated marine bearings. Offering low friction, excellent wear resistance, and reliable performance in demanding operating conditions, TITN is a cost-effective alternative to Thordon XL for propeller shaft bearings, stern tube bearings, and custom marine bushings.
Minimum Order Quantity: 1
Price: USD, CNY
Packaging Details: Wooden or heavy duty carton packaging
Delivery Time: 15working days
Payment Terms: T/T
Supply Ability: 10000
Looking for an alternative to Thordon XL for a marine bearing replacement or new shaft installation?
Techemer TITN is an engineered elastomer-alloy bearing material developed for water-lubricated applications. It combines low-friction sliding behavior with wear resistance and the resilience needed in marine shaft bearing systems.
TITN is available for custom bearing and bushing applications. Our engineering team can review your existing bearing dimensions, shaft arrangement and operating conditions to determine whether TITN is a suitable alternative to Thordon XL.
Thordon XL is widely used in water-lubricated propeller shaft bearings because it offers a practical balance of wear resistance, friction performance and shock resistance.
When replacing an existing XL bearing, choosing another polymer material involves more than matching the dimensions. The replacement must also suit the shaft load, operating speed, water quality, shaft sleeve and required bearing clearance.
Techemer TITN is worth evaluating for these applications because of its wear-resistant elastomer-alloy material system and its suitability for water-lubricated bearing designs.
Wear Resistance
TITN is formulated for sliding contact applications where bearing wear is a major consideration. Laboratory abrasion testing provides an initial basis for material comparison.
Low-Friction Sliding Performance
Its engineered polymer structure supports low-friction operation in suitable water-lubricated bearing arrangements.
Resilient Bearing Material
The elastomer-alloy structure offers compliance that can be useful in shaft bearing applications involving vibration and limited alignment variation. Allowable movement depends on the final bearing design.
Water-Lubricated Operation
TITN can be considered for bearing systems that use water as the lubricating medium, reducing dependence on oil lubrication at the bearing interface.
Custom Bearing Manufacturing
Techemer can discuss bearing dimensions, machining requirements and configurations based on the customer's drawings and operating conditions.
GB/T 9867, ISO 4649 and ASTM D5963 Relative Volume Wears Comparison (mm³)
Partial data from THORDON product description
Under the same conditions, Techemer elastoplastic alloy has less wear than other common nonmetal bearing materials, and some of its models are even better than imported materials,which means Techemer bearing has longer service life, higher reliability and lower maintenance cost.
The available ASTM D5963 abrasion comparison places TITN in a similar wear-performance range to Thordon XL under the test conditions represented.
This makes TITN a material worth considering when evaluating alternatives to XL.
However, laboratory abrasion results alone do not establish equal service life in a marine propulsion system. Actual performance also depends on water quality, shaft finish, bearing load, speed, alignment and lubrication conditions.
For a replacement project, Techemer recommends reviewing the complete bearing arrangement before final material selection.
Here are the latest news about our company and industry. Read these posts to get more information about the products and the industry and thus get inspiration for your project.
Techemer develops and manufactures functional polymer materials and engineered bearing solutions for marine, hydropower and pump applications.
Founded in 2008, the company combines polymer material development, machining capabilities and bearing application experience to support industrial customers.
Our team works with shipyards, equipment manufacturers and maintenance contractors on new bearing projects and replacement requirements.
We focus on helping customers select materials and bearing configurations that suit their actual operating conditions.
| Property List of INDRON® Elastic-plastic Alloy | ||||
| TITN | TSTN | |||
| Properties | Unit | Test Method | Typical Value | |
| Physical Property | ||||
| Density | g/cm3 | ASTM D792-08 | 1.20 | 1.17 |
| Mechanical Properties | ||||
| Tensile Strength | MPa | ASTM D638-08 | 31.6 | 40.3 |
| Elongation at Break | % | ASTM D638-08 | 192 | 199 |
| Tensile modulus | MPa | ASTM D638-08 | 580 | 650 |
| Hardness | Shaw A | — | — | |
| Hardness | Shaw D | ASTM D2240-03 | 70 | 65 |
| Water absorption (24h) | % | ASTM D570-98 | 0.5 | 0.5 |
| Water absorption (saturation) | % | ASTM D570-98 | 1.2 | 1.2 |
| Impact strength (notched Izod) | J/M | ASTM D256-06a | 573 [P] | 660 [P] |
| Compressive Strength | MPa | ASTM D695-08 | 20.8 | 24.6 |
| Modulus Compression | MPa | ASTM D695-08 | 410 | 430 |
| Compressive Set (24h) | % | ASTM D395-03 | 25 | |
| Maximum Operating Pressure (dynamic) | MPa | 5.5 | 10 | |
| Maximum Operation Temperature (in water) | °C | 70 | 70 | |
| Maximum Operation Temperature (Dry) | °C | 110 | 110 | |
| Tribology Property | ||||
| DIN Abrasion (Dry) | mm3 | ASTM D5963-04 | 96 | 138 |
| Limiting PV (Seawater Cycling, Linear Speed 5.13m/s) | MPa·m/s | GB7948-87 | — | 101.3 |
| Coefficient of Dynamic Friction (Water) | GB7948-87 | — | 0.08-0.16 | |
| Coefficient of Dynamic Friction (Dry) | ASTM D3702-94 | 0.13-0.2 | 0.09-0.13 | |
| Replacement to XL | Replacement to SXL | |||
Detailed material specifications and recommended operating limits should be confirmed with Techemer before final selection.
Please feel free to contact us at any time