Techemer - Water-Lubricated Bearings & Shaft Seals Manufacturer Since 2008
Techemer carbon fiber bearings are made from continuous carbon fiber reinforced resin composites, combining high mechanical strength, low friction, wear resistance, and dimensional stability. Manufactured using precision filament-winding technology, these composite plain bearings and bushings are available in custom sizes for pumps, fluid-handling equipment, and industrial machinery.
Minimum Order Quantity: 1
Price: USD, CNY
Packaging Details: Wooden or heavy duty carton packaging
Delivery Time: 15working days
Payment Terms: T/T
Supply Ability: 10000
A carbon fiber bearing is a fiber-reinforced composite plain bearing designed to support a shaft through sliding contact.
Techemer carbon fiber composite bearings use high-modulus continuous carbon fibers as reinforcement, combined with a high-performance thermosetting resin matrix. The fibers provide structural strength, while the resin system contributes to chemical stability and wear performance.
The material is manufactured through precision filament winding and controlled curing, then machined into finished bearings, sleeve bushings, and other cylindrical wear-resistant components.
Compared with conventional metallic components, carbon fiber reinforced bearings offer a lightweight, non-metallic alternative for selected applications involving sliding wear, corrosion, and metal-to-metal contact.
The reference composite material has a reported wet friction coefficient of 0.032 and dry friction coefficient of 0.131.
Low sliding friction can help reduce friction-related energy losses in suitable bearing systems. Actual performance depends on the shaft material, contact pressure, sliding speed, lubrication, and operating temperature.
Continuous carbon fiber reinforcement provides high mechanical strength without the weight of conventional metallic bearing materials.
The reference material has a density of 1.24 g/cm³, tensile strength above 600 MPa parallel to the fibers, and flexural strength above 536 MPa parallel to the fibers.
These properties make carbon fiber reinforced composites worth considering for demanding industrial bearing and wear-part applications.
In the reported 192-hour wear test, the composite material showed a wear scar depth of just 0.03 mm.
This laboratory result demonstrates the material's wear performance under the specified test conditions. Actual bearing wear and service life depend on operating conditions and the mating surface.
Conventional metal components can experience adhesive wear or galling when sliding surfaces come into direct contact.
A properly selected carbon fiber composite bearing provides a non-metallic sliding interface that can reduce the risk of metal-to-metal galling and help protect mating components.
The continuous fiber-reinforced structure helps maintain dimensional consistency under mechanical loading.
The reference material also has a reported water absorption value of 0.09% after 24 hours, making moisture-related dimensional behavior an important consideration in precision bearing design.
The engineered resin matrix provides resistance to selected corrosive environments, making carbon fiber composite bearings suitable for evaluation in water-handling and chemical-processing equipment.
Chemical compatibility must be confirmed for the specific fluid, concentration, and operating temperature.
High-modulus carbon fibers form the primary load-bearing structure. Their controlled arrangement provides strength and stiffness in the designed fiber directions.
The resin matrix bonds the reinforcing fibers and contributes to chemical resistance, structural integrity, and sliding performance.
Continuous fibers are impregnated with resin and wound around a mandrel. The resulting composite structure is cured and subsequently machined to the required dimensions.
This manufacturing process is particularly suitable for cylindrical composite bearing blanks, sleeve bearings, and custom bushings.
After curing, the composite blanks can be machined into finished components according to customer drawings, including specified inside diameters, outside diameters, lengths, and tolerances.
Techemer specializes in engineered polymer composites and bearing solutions for industrial machinery, pumps, marine equipment, and hydropower applications.
Our capabilities include composite material development, filament-wound component manufacturing, precision machining, and custom bearing production.
We work with equipment manufacturers, engineering teams, and maintenance contractors to review bearing requirements and manufacture components to agreed specifications.
Please feel free to contact us at any time